My Weekly Ustream Class At Integrity Labs In Olympia, WA

This Marijuana industry is going to be bigger than Alcohol and Tobacco combined! So all you distilling professionals, look into this, for it is coming to a state near you. Its bigger also in tax receipts and profitability in privatized businesses. The butane industry (most cannabis oil made with), does NOT care about the health care of its consumers. For those who want to get into this, make alcohol 190 proof organically and derive it from red grapes. Cannabis Concentrates with Alcohol is the best!

The alcohol you are using you are not consuming. It is left over. But it is made like vodka, and all natural. It is like for tinctures. The quality of the alcohol will always reflect the outcome of any plant extractions. Example: the spirit of red wine, is great to extract the resins of cannabis.

Get your Ethyl Alcohol, Gold Shield etc. in stores or make it yourself. Get your Federal TTB.gov permit for “Alcohol fuel” and get to make up to 10,000 gallons-a-year. The permit will not cost you one cent. Whatever you make goes into your car.

We have for sale “The Witch” Herbal Extraction Unit, in one-gallon size only. This size is for safety. This will make a Cannabis Oil using Alcohol. Crystal clear and the color gold, if you like. Make a superior product! You would not believe what is out there! I am telling you, this is such a good deal.

You do not have to buy a 20 thousand-dollar still or be a corporation to get cannabis oil. I have tested and posted a lot of the results online. I work with local labs to do this, more than one. There is no still out there like this. Period. I have had up to 92% THC. It is only allowing me to have 6% terpenes in there.

What I found out is to keep the strength of the THC, or the CBDs around 85% It allows me then to have 12% terpenes. Which gives you flavors and a delivery system.

See my videos and photos section (above). This is adjustable if you want chlorophyll or not. Even non psychoactive oil, you can make, through a non solvent distillation, if you choose. The way to make a non psycho active oil, using an alcohol solvent, is allowing the alcohol to evaporate without any heat. And extraction is done using freezing alcohol and the plant material. I am available to chat so call me.?

Stop using Butane, Hexane, ISO, other poisons, etc. to render your Marijuana Oil. Just because they show you in parts-per-million and sometime does not even register, it does not mean it is not there. I guarantee if you extract with a poison, you will end up with the same.

Use Alcohol, clean and pure. Or a CO₂ machine, water extraction and other non solvents.

I developed a hash oil still that will get one of the hardest oils to distill, out. See my blog and youtube for all information. I have a 9-part How-To on YouTube and also assembly and infusing with flavors like tangerine. I have more cannabis oil videos waiting to be uploaded as well all the time. Also, you can read my story on how I got where I am today, with this still on my blog.

We sell this as an herbal extractor. It will also make essential oils out of anything else, through absolutes. Really fine perfumes.

Want to learn how to make Cannabis Hash Oil? Follow US!

There are two processes of extraction and both are opposite ends of each other on the temperature scale. I will soon make a color chart from “Dark English Racing Green” to the color of Gold. This really is the gold Alchemists have been looking for.

Distillers: Make Alcohol For The Marijuana Industry. In two years people will discover that butane THC oil extraction is not safe, and this will fly! I see it.

• The two industries can cross over instead of competing, it is the inevitable for “Medical”.
• This is One-Gallon Version of The Witch Herbal Extraction Still.
• People have said they have done a day of extraction and it has paid for the unit!

Comes with 18 pieces including one-gallon electrical pot, citric acid, electric control panel, 4x SS clamps 2″, 4x SS caps 2″, 4x silicone gaskets 2″, 1x screen gasket 2″, 1x Alchemist tower 2″, 1x glass 2″ extension, 1x SS extension, 1x filter pack and rack, 1x modular stand, 1x pair of rubber gloves, 4x rolls of copper mesh, 1x infrared thermometer, 1x large digital thermometer, 1x 45° degree thermometer, hoses, 1x extra large funnel, etc.

Please see my blogs, video and photos section for how-to’s and descriptions.

Photos

The Alchemist Copper Moonshine Tower that comes with this, is made to fit any keg or boiler with 2″ opening.

What I found out is to keep the strength of the THC, or the CBDs around 85% It allows me then to have 12% terpenes. Which gives you flavors and a delivery system.

See my videos and photos section. This is adjustable if you want chlorophyll or not. Even non psychoactive oil, you can make, through a non solvent distillation, if you choose. The way to make a non psycho active oil, using an alcohol solvent, is allowing the alcohol to evaporate without any heat. And extraction is done using freezing alcohol and the plant material. I am available to chat so call me.?

Stop using Butane, Hexane, ISO, other poisons, etc. to render your Marijuana Oil. Just because they show you in parts-per-million and sometime does not even register, it does not mean it is not there. I guarantee if you extract with a poison, you will end up with the same.

Use Alcohol, clean and pure. Or a CO₂ machine, water extraction and other non solvents.

I developed a hash oil still that will get one of the hardest oils to distill, out. See my blog and youtube for all information. I have a 9-part How-To on YouTube and also assembly and infusing with flavors like tangerine. I have more cannabis oil videos waiting to be uploaded as well all the time. Also, you can read my story on how I got where I am today, with this still on my blog.

We sell this as an herbal extractor. It will also make essential oils out of anything else, through absolutes. Really fine perfumes.

There are two processes of extraction and both are opposite ends of each other on the temperature scale. I will soon make a color chart from “Dark English Racing Green” to the color of Gold. This really is the gold Alchemists have been looking for.

Distillers: Make Alcohol For The Marijuana Industry. In two years people will discover that butane THC oil extraction kills, and this will fly!

The two industries can cross-over instead of competing, it is the inevitable for “Medical”.

I have a 9-part YouTube set on how this Hash Oil still works. Also, one on assembly. I have one coming soon infusing Cannabis Oil with lemon, tumeric, etc.

There is no machine out there like this. I know I am about to piss a lot of people off, with this still. Those that want you- to buy their twenty thousand dollar machines to render Marijuana Hash Oil. This can be done, I found a way. Never before out there until now this information. I know I am because there has never been a still that can do what mine can with alcohol. Those who are out there doing a butane rendering and blowing their mom’s houses up, please stop. I did it. I found a simple process. I have shared it all with you on my YouTube account under Rainier Distillers.

I have made a new still that is safe for the public. It is a one-gallon still. I do this strictly for safety.. With the general public I was too afraid of someone getting hurt so I designed a small version of my Marijuana Hash Oil Alcohol Still. We sell this on the shopping cart as an herbal oil extractor. For it can also do essential oils, the expensive way. The way perfumes are made. I am not selling the larger version still.

It is a clean natural way to remove oils, without using any chemicals. Make clear concentrates. No Butane, nothing toxic. This one-gallon hash oil still is not under pressure. It is not an essential oil process with steam – but one I have found to work. Have you heard of absolutes? It is in three steps. Everything will be in the manual on youtube. I cannot teach this process in public, just in Medical Marijuana Testing labs for now. I hope you understand the nature of this business. I have made an instruction video to come with the still on YouTube. Nothing comes with the still as instructions for legalities. I do not know what country this is going to. I can answer all your questions via email to answer them. Most of this information is on my website, my blogs and videos. My expertise is in building stills. I always said I could get the oil out of anything and this still took me the longest to create. Marijuana Hash Oil is the hardest oil to extract with the full properties. It was a very difficult oil to remove. This took me a long time and I hope you can appreciate the numbers I have gotten. For those where it is not legal, to make Marijuana Hash Oil, you can always use this to make essential oils with this process as well. It is not steam distillation. I hope with this still will help those that are pursuing medicinal oils and also to support local communities spreading up everywhere around here. It is called The Witch. It uses the Alchemist tower, if you already have one, you just get the parts from me. Anyone in the industry please call me just to chat. Pass this on to experts, Connect Me!

“You cannot get higher than that”, say the toxicologists. The labs had to buy all new equipment, just for this oil. They couldn’t believe it, how clear it was etc.

Real Customer Review:

‘Made gold finally. ‘Figured it out. Dry ice pellets in the hot pot at the end freezes the subject from 172°F to below zero instantly. That stops the process that turns subject dark. What I’m getting looks like liquid gold metal. It can probably be done with nitrogen. It must be done as soon as possible at the ending bell. I choose dry ice pellets over nitrogen for the whole process. It’s safer, less expensive to transport, and partially recoverable. Also discovered that if I stack the steel on top of the glass, and fill it 1/3 full of pellets, when I fill the cold alcohol to the top, and cap the top with a washer in place, and hold the cap down with (gloved) hand pressure, the pressure inside builds, and literally blasts the alcohol through under sub zero pressure. The alcohol comes out green free and fizzing a clear golden color. Towards the end of the last pour, I clamp the cap. The warmer temp of alcohol by then (from -55F up to -25F) creates more CO₂ to drive the rest of the alcohol from the glass. At -15F, I move the extractor, but I capture until the last drip to save the alcohol. The resulting garbage is mostly wax, turpentine, varnish, chlorophyl, bug shit, and tannin. The dry ice remaining goes back into the chest…. Wow! What an education. I’m beholden to you brother.” ~ 7/31/2014

“I have been using the weed witch for almost a year and have made concentrated tinctures in less than day.”

Full on medicinal power it’s blowing the traditional tincture method away. Skeptics will be talking and I’ll be enjoying the fruits of my labor. ~ 4/15

The Witch Herbal Extractor can do three types of extractions, it has capabilities of three different methods. Cold Critical, Soxhlet and RSO-like. In Cold Critical you are tieing up the lipids, fats and waxes so there are no high chlorophyll concentrations. It is when you freeze the plant material and solvent in a chest freezer. This method will lock up the coloration of your oils. The colder you can get it the more with your oils color. The the Soxhlet method where you are putting the plant material in a vertical chamber where the vapor passes through it. The components from the plant fall back into the pot, in the solvent, recycling. This is controlled by the liquid management tap on the Witch Herbal Extractor Still. Then there is the RSO like method, people most familiar with. You place the plant material in the pot and pour solvent (ethyl alcohol) over it until it covers the plant material. Leave it running for 30-minutes with the liquid management tap turned off, now empty the liquid and plant material into the filters provided. Return the liquid into the pot, turn the LM tap on and now remove the solvent (ethyl alcohol) which leaves the oil behind. Do not forget, of your THC your oils test positive for, not all of it may be “activated” so make your oils twice as potent by extending the time of this last part.

1. What the best way to render down the oil on low heat after it is finished distilling and it’s poured from the distiller pot? The safest way would be to waterbath them. Meaning you get a small pyrex glass dish and you put that in another pyrex and make sure it is larger, because it is going to be filled with water. So place the pyrex bowl with the oil in it, and float it in the water. Bring up the bottom water to 130-140° F and let that cook off the remaining ethyl alcohol, the higher the heat, the shorter the time. But the higher the heat, the more terpenes you are going to lose. That is why it is good to keep it around 120°F in the oil temperature, not the water.

2. What are those sheets you put down on the bottom of the dish with the green edged tape? They are called Silicone sheets and you can buy them off ebay.

Do you put it in the dish after purging the last of the ethanol or before? You put it in the dish to do the remaining finish. Removing all the ethyl alcohol, do this a few times and you will understand. The silicone is a non stick so it makes the time of cleanup much easier.

Make Marijuana Cannabis Oil Start a Business

Make Marijuana Cannabis Oil. I have people who bought one who come back and tell me they love it.

I do many demos and videos, so please watch and subscribe to my videos, sometimes I take them down later for peoples privacy. So watch when you can.