The Marijuana industry is going to be bigger than Alcohol and Tobacco combined! Start refining your process now as legalization should be expanding to multiple states as time goes on. Most cannabis oil in the industry is made by the butane and CO2 process. Producers who use this method, in our opinion may be putting consumers, and manufacturers at risk. Cannabis Concentrates with Alcohol are the safest, most economical, and healthiest option available. The unit is a reflux still, so that means that the unit is under no pressure, so you are not in danger of the unit exploding from pressure. The process uses only Ethanol and plant material, and in our opinion less ingredients are best.

From a business stand point, the unit will save you vast amounts of money. The cost of Ethanol can run up to $60-100 per gallon for 200 proof Ethanol. Our unit allows you to not only make your own Ethanol (in large volume with the Ethanol Still Conversion on the 2.5 and 5 Gallon unit), but also to reclaim up to 90% of any ethanol you use in the still for production. This can take your cost, down to under $5.00 per Gallon during production. You can see how this unit can pay for itself in one day of operation alone.

You do not have to buy a 20 thousand-dollar still or be a corporation to get cannabis oil. We have tested and posted a lot of the results online. We work with local labs to do this, more than one. There is no still out there like this. We have had up to 97% total Cannabinoid Count.

Real Customer Review:

‘Made gold finally. ‘Figured it out. Dry ice pellets in the hot pot at the end freezes the subject from 172°F to below zero instantly. That stops the process that turns subject dark. What I’m getting looks like liquid gold metal. It can probably be done with nitrogen. It must be done as soon as possible at the ending bell. I choose dry ice pellets over nitrogen for the whole process. It’s safer, less expensive to transport, and partially recoverable. Also discovered that if I stack the steel on top of the glass, and fill it 1/3 full of pellets, when I fill the cold alcohol to the top, and cap the top with a washer in place, and hold the cap down with (gloved) hand pressure, the pressure inside builds, and literally blasts the alcohol through under sub zero pressure. The alcohol comes out green free and fizzing a clear golden color. Towards the end of the last pour, I clamp the cap. The warmer temp of alcohol by then (from -55F up to -25F) creates more CO2 to drive the rest of the alcohol from the glass. At -15F, I move the extractor, but I capture until the last drip to save the alcohol. The resulting garbage is mostly wax, turpentine, varnish, chlorophyl, bug shit, and tannin. The dry ice remaining goes back into the chest…. Wow! What an education. I’m beholden to you brother.” 7/31/2014

“Full on medicinal power it’s blowing the traditional tincture method away. Skeptics will be talking and I’ll be enjoying the fruits of my labor.” 3/4/2015
“I have been using the weed witch for almost a year and have made concentrated tinctures in less than day.” 8/12/15

The Witch Herbal Extractor can do three types of extractions, it has capabilities of three different methods. Cold Critical, Soxhlet and RSO-like. In Cold Critical you are tieing up the lipids, fats and waxes so there are no high chlorophyll concentrations. It is when you freeze the plant material and solvent in a chest freezer. This method will lock up the coloration of your oils. The colder you can get it the more with your oils color. The the Soxhlet method where you are putting the plant material in a vertical chamber where the vapor passes through it. The components from the plant fall back into the pot, in the solvent, recycling. This is controlled by the liquid management tap on the Witch Herbal Extractor Still. Then there is the RSO like method, people most familiar with. You place the plant material in the pot and pour solvent (ethyl alcohol) over it until it covers the plant material. Leave it running for 30-minutes with the liquid management tap turned off, now empty the liquid and plant material into the filters provided. Return the liquid into the pot, turn the LM tap on and now remove the solvent (ethyl alcohol) which leaves the oil behind. Do not forget, of your THC your oils test positive for, not all of it may be “activated” so make your oils twice as potent by extending the time of this last part.

1. What the best way to render down the oil on low heat after it is finished distilling and it’s poured from the distiller pot?
The safest way would be to waterbath them. Meaning you get a small pyrex glass dish and you put that in another pyrex and make sure it is larger, because it is going to be filled with water. So place the pyrex bowl with the oil in it, and float it in the water. Bring up the bottom water to 130-140° F and let that cook off the remaining ethyl alcohol, the higher the heat, the shorter the time. But the higher the heat, the more terpenes you are going to lose. That is why it is good to keep it around 120°F in the oil temperature, not the water.

2. What are those sheets you put down on the bottom of the dish with the green edged tape?
They are called Silicone sheets and you can buy them off eBay. Silicon sheets and utensils make handling the finished product easier. You can use, legal paperclips, or small clamps to hold the edges together to make a silicone tray that is easy to remove product from.

3. Do you put it in the dish after purging the last of the ethanol or before?
You put it in the dish to do the remaining finish. Removing all the ethyl alcohol, do this a few times and you will understand. The silicone is a non stick so it makes the time of cleanup much easier.

There is a 1 Gallon, 2.5 Gallon, & 5 Gallon Big Witch Herbal Extractor
What is a Weed Wtich, what does it let you do and how will it help your hobbyist or commercial production?
A weed witch stated simply is a reflux still which allows reclamation and production of Ethanol. Ethanol is the most expensive part of Marijuana oil production. The Weed Witch allows you to reclaim 90% of your Ethanol while making Alcohol Cannabis Oil. This cuts your production costs by a large amount. This is especially true, when you get the $1000.00 30 gallon Ethanol Still upgrade to your 2.5 or 5 Gallon Big Witch Herbal Extractor. This lets you produce your own high proof Ethanol, then reclaim it, all in one unit. The product you can produce with our system is comparable to Rick Simpson Oil, but is typically able to reach higher total cannabanoid count. The product is great as an alternative to BHO, and is a no pressure system so you don’t face the dangers present in C02 extraction. If you want a reliable production unit, for making Cannabis Extracts from vape, tincture, to shatter this is the system for you. You can even get honey oil with the addition of a short path distiller. Similar lab grade equipment can cost tens of thousands of dollars. Our unit, is made economically and built to last.
The Small Witch comes with the 2 inch Alchemist. $1500.00
Also comes with 18 pieces including one gallon electrical pot
,
electric control panel,4 SS clamps 2″, 4 SS caps 2″,
4 silicone gaskets 2″, 1 screen gasket 2″, 1 Alchemist
tower 2″,1 glass 2″ extension, Stainless Steel French Press,
1 filter pack and rack, 1 modular stand,
1 pair of rubber gloves, 4 rolls of copper mesh, 1
infrared thermometer, 1 large digital thermometer,
1 45 degree thermometer,hoses, 1 extra large funnel.
Product Description :
Stainless steel boiling chamber including stainless steel dome.
Distiller Output: 12 Gallons/day if run continuous.
ACO Output: Up to 1/2 Lb Cannabis per gallon ethanol 170-200 proof, ACO output can yield up to 20% of
Cannabis Material gram weight.Base Size: 8 in.(20cm) width X 14 1/4 in.(36cm) hght. Tower is 26in.
Power source: AC 120V/60Hz
Power Consumption: 580W (Total) Heater 565W
Water Cooled condenser and Tower: Cold input, Hot output. Standard Garden Hose Fitting.
Capacity: 4 L.(1 gal. ethanol 170-200 proof) per 2 hours.
Shipping $50 domestically. Local Delivery on case by case with fee. Consulting and set up on case by case basis with fee.
We can do 60% down and 40% before we ship.
We offer a free phone consultation (971-232-0895) to answer all your needs regarding set up, and all peripherals you may need from hobbyist to large scale commercial production.
The 2.5 Gallon Witch comes with the 3 inch Alchemist.$4800.00
Comes with 3″ tower, five foot liebig condenser, 3x 1500 Watt elements, 30 Gallon Outer Pot, 2.5 Gallon Inner Pot. This is a double boiler system that helps encourage even heating and prevent scorching.
Turn your unit into a 30 Gallon Ethanol Still for $1000.00.
Stainless Steel Pot, Copper Tower.
Distiller Output: 36 Gallons/day if run continuous.
ACO Output: Up to 1/2 Lb per gallon ethanol 170-200 proof, ACO output can yield up to 20% of
Cannabis Material gram weight.Base Size: 21in wide. 29in tall Tower height 54in.
Power source: 3x 1500 Watt elements, separate plug and breaker. (2 larger heating elements can be used with a Still Troll)
Power Consumption: 4500 watts.
Water Cooled condenser and Tower: 3 Cold inputs, 3 Hot outputs. Standard Garden Hose Fittings.
Capacity: 6 L.(1.5 gal. ethanol 170-200 proof) per 1 hour.
Shipping $350 domestically. Local Delivery on case by case with fee. Consulting and set up on case by case basis with fee.
We offer a free phone consultation (971-232-0895) to answer all your needs regarding set up, and all peripherals you may need from hobbyist to large scale commercial production.
The 5 Gallon Big Witch Herbal Extractor comes with the 4 inch Alchemist.$6800.00
Comes with 4″ tower, five foot lie big condenser, 3x 1500 Watt elements, 30 Gallon Outer Pot, 5 Gallon Inner Pot. This is a double boiler system that helps encourage even heating and prevent scorching.
Turn your unit into a 30 Gallon Ethanol Still for $1000.00.
Stainless Steel Pot, Copper Tower.
Distiller Output: 72 Gallons/day if run continuous.
ACO Output: Up to 1/2 Lb per gallon ethanol 170-200 proof, ACO output can yield up to 20% of
Cannabis Material gram weight.Base Size: 21in wide. 29in tall Tower height 54in.
Power source: 3x 1500 Watt elements, separate plug and breaker. (2 larger heating elements can be used with a Still Troll)
Power Consumption: 4500 watts.
Water Cooled condenser and Tower: 3 Cold inputs, 3 Hot outputs. Standard Garden Hose Fittings.
Capacity: 12 L.(3 gal. ethanol 170-200 proof) per 1 hour.
Shipping $350 domestically. Local Delivery on case by case with fee. Consulting and set up on case by case basis with fee.
We can do 60% down and 40% before we ship.
We offer a free phone consultation (971-232-0895) to answer all your needs regarding set up, and all peripherals you may need from hobbyist to large scale commercial production.
We can offer custom size stills to suite commercial growers, price negotiable!
* All products are custom made, if a refund is requested before completion, we will refund 70% of total unit cost for material and labor costs. Allow 4-6 weeks for production.